LUBRICANT l INTERVAL
INTRVAL l LUBRRCANT
5
GAA
Upper Closing Sheaves
Upper Cable Guide
GAA
5
Roller Pin
5
GAA
Blade Arm Bushings
Lower Cable Guide
GAA
5
Roller Pins
Lower Closing Sheaves GAA
5
5
GAA
Corner Pin Bushings
(1 Fitting each corner)
Bottom Sheave Block
GAA
5
FOLD
FOLD
- KEY -
EXPECTED
TEMPERATURES
o
o
o
o
oF
LUBRICANTS
CAPICITY
ABOVE +32 F
+40 F TO -10 F
0 F TO -65
INTERVALS
HDO-OIL, Engine, Heavy Duty
34 qts
Intervals
Oil Can Points
HDO 30
HDO 10
OES
given are
Air Cleaner
4 1/2 qts
in hours of
OES-OIL, Engine, Sub-zero
normal
GAA-GREASE, Automotive and Artillery
ALL TEMPERATURES
operations
5. LUBRICANTS. The following is a
list of
lubricants with the Military
NOTES:
Symbols and applicable specification numbers.
1. FOR OPERATION OF EQUIPMENT IN PROTRACTED COLD
TEPERATURES BELOW 10o F.
OES MIL-L-10295
GAA MIL-G-10924
HDO MIL-L-45199
Remove lubricant prescribed in the key for temperature above 10o F.
Copy of this Lubrication Order will remain with the equipment at all
Relubricate with lubricants specified in the key for temperatures below
10o F.
times; instructions contained herein are mandatory.
BY ORDER OF THE SECTRETARY OF THE ARMY:
2. OIL CAN POINTS. Every 10 service hours lubricate all linkage,
pins and clevises with HDO.
W.C. WESTMORELAND
General, United States Army,
3. CABLES. Keep cables clean and lubricated with HDO. CAUTION:
Chief of Staff
Do not lubricate cables coming in contact with excavated
materials.
OFFICAL:
4. ENGINES OIL FILTERS. Every 100 hours remove filter element,
clean housing, install new element, fill crankcase, operate engine for
KENNETH G. WICKHAM
five minutes, check for leaks.
Major General, United States Army,
The Adjutant General
LO 5-3810-206-12-2 DISTRIBUTION: To be distributed in accordance with DA Form 12-25, (qty rqr block no. 349) Section II, Operator's Maintenance requirements for Crane Shovels,
Crawlers, 40 Ton.
GPO 822-246