LO5-3810-206-12-3
LUBRICANTlINTERVAL
INTER
VALlLUBRICANT
Hammer Guides
CW11 10
5 GAA Pivot Pin
5 GAA Horizontal Sheaves
Vertical Sheaves GAA 5
5 GAA Pivot Pin
-KEY-
LUBRICANTS
CAPACITY
EXPECTED TEMPERATURES
INTERVALS
Above +32F +40F to -10F
0F to -65F
HDO-OIL, Engine, Heavy Duty
HDO 30
Intervals give
Oil Can Points
are in hours of
CW-11B-LUBRICANT, Exposed Gears
ALL TEMPERATURES
normal operation
GAA-GREASE, Automotvie and
Artillery
NOTES
Copy of the Lubrication Order will remain with the
equipment at all times; instructions contained herein are
1.
FOR OPERATION OF EQUIPMENT IN
mandatory.
PROTRACTED COLD TERMPERATURES BELOW -
10F.
Remove lubricants prescribed in key for
BY ORDER OF THE SECRETARY OF THE ARMY:
temperatures above -10F. Relubricate with lubricants
W.C. WESTMORELAND
specified in the key for temperatures below -10F.
General, United States Army
Chief of Staff
2.
OIL CAN POINTS. Every 10 service hours
lubricate all linkage, pins and clevises with HDO.
OFFICIAL:
3.
CABLES. Keep cables clean and lubricated with
HDO.
KENNETH G. WICKHAM
CAUTION: Do not lubricate cables coming in contact
Major General, United States Army
with excavated materials.
The Adjutant General
4.
LUBRICANTS.
The following is a list of
lubricants with the Military Symbols and applicable
specification numbers.
HDS MIL-L-45199 GAA MIL-G-10924 CW-11B VV-L-
751
Lo 5-3810-206-12-3 DISTRIBUTION: To be distributed in accordance with DA Form 12-23, Sec II (qty rqr Block #349).
Organizational maintenance requirements for Crane Shovels, Crawlers, 40 Ton.
GPO: 1994 0-300-721 (00327)