TM 10-3950-672-24-2
B Series Sealants
Use the sealants listed below or sealants containing equivalent properties.
Part
Sealinq Method
Pipe Plugs
Precoated blue teflon.
Gaskets
Oil Pan
Apply Three Bond 1 207-C to the four "T" joints
and smear into the joints with finger until full.
Gear Cover
No sealant required.
Tappet Cover
Self-adhesive tappet cover side. K&W Copper
Coat #1504 - block side.
All Other Gaskets
K&W Copper Coat #1504- both sides.
Cup Plugs
Loctite 277 or 11,264.
O-Rings
No sealant required.
Rear Camshaft Expansion Plug
Loctite 277.
Intake Cover Capscrews
Precoated or Loctite 59,241 liquid teflon.
Fuel Pump Studs
Loctite 601.
Dipstick Tube in Block
Loctite 277 or 11,264 or precoated.
Wet Flywheel Housing to Block
Permatex 2-C.
Front Seal in Gear Cover
Loctite 277 or 11,264.
Rear Seal in Rear Cover
No sealant required.
Timing Pin Housing C/S
Loctite 59,241 liquid teflon or precoated.
B Series Lubricants
Use the lubricants listed below or lubricants containing equivalent properties.
Part
Lubricant Reauired
Lubriplate 105
Lubriplate 105
Cam Lobes and Journals
Lubriplate 105
Tappets
Lubriplate 1 05
15W40 Engine Oil
Piston Rings
15W40 Engine Oil
Piston Pin
15W40 Engine Oil
Rocker Assemblies
15W40 Engine Oil
Push Tubes
15W40 Engine Oil + Lubriplate 105 in Cup
Capscrews (under head and on threads)
15W40 Engine Oil
Main Capscrews
15W40 Engine Oil
Balancer Mounting Capscrews
15W40 Engine Oil
Cylinder Head Capscrews
15W40 Engine Oil
Connecting Rod Capscrews
15W40 Engine Oil
Flywheel Mounting Capscrews
15W40 Engine Oil
Damper Mounting Capscrews
15W40 Engine Oil
All Other Capscrews
Valve Stems
90W or 140W Oil
Front and Rear Seals to Crankshaft
Rear Seal in Seal Housing
Soapy water to install seal in housing
Lube Oil Pressure Regulator
15W40 Engine Oil
5-369/(5-370 blank)