Figure 3-88. Swing and propel shifter lever and linkage, removal and installation.
engagement at of the swing or propel jaw clutches by
(3) When length is satisfactory, tighten
adjusting the overall length of pipe and two rod ends as
locknut up to rod end and connect rod end to lever by
installing pin and securing
(1) Remove cotterpin and pin that connects
rod end clevis to lever.
3-115. Swing Broke Hydraulic Control and Linkage
(2) Loosen locknut at rod end, then turn pipe
clockwise to shorten, counterclockwise to lengthen.
a. Swing Brake Hydraulic Control, Removal and