TM 5-3810-207-20/TO 36C23-3-37-12
Figure 129. Blackout service light, removal and installation.
Removal. Remove the headlight as instructed on
Disassembly. Disassemble the front headlight in
the numerical sequence as illustrated on figure 134.
Cleaning and Inspection.
Clean all parts with a cloth dampened with
an approved cleaning solvent and dry
Inspect all parts for breaks, damage, and
proper operation. Replace damaged parts
Reassemble. Reassemble the headlight in the
reverse numerical sequence as illustrated on figure 134.
Installation. Install the headlight as illustrated on
Headlights must be adjusted properly to
prevent a blinding glare to the operator of
an oncoming vehicle.
Position the unloaded equipment on a flat
and level surface at right angles to, and 25
feet from, a suitable vertical surface.