TM 5-3810-207-20/TO 36C23-3-37-12
Figure 176. Rear wheel, removal and installation.
Do not attempt to remove tire
retaining ring until tire is completely
Remove the tire from the rim and re
move the tube liner and tube from the
Cleaning, Inspection, and Repair.
Clean the rim with an approved cleaning
excessive wear, and other damage.
Repair or replace tire as necessary.
Inspect the tube and liner for cuts,
punctures, and other damage. Repair or
replace tube and liner as necessary.
Inspect the retaining ring for bends and
other damage. Replace defective
Install the tube in the tire so the valve
stem is in line with the balancing mark
on the tire.
Install the liner in the tire and inflate
tube slightly to prevent the liner