TM 5-3810-207-20/TO 36C23-3-37-12
Figure 19. Water temperature sending units, removal and installation.
87. Cab Dome Light
Remove the dome light as instructed on figure
Check and replace switch as illustrated on figure
Disassemble the dome light in the numerical
sequence as illustrated on figure 27.
Clean and inspect all parts. Replace or repair
Reassemble the dome light in the reverse of the
numerical sequence illustrated on figure 27.
Install the dome light as illustrated on figure 26.
88. Clearance Light
Removal and Disassembly. Remove and
disassemble the clearance light as instructed on figure
Cleaning and Inspection. Clean the clearance
lights with an approved cleaning solvent.
clearance light in reverse order as instructed on figure
89. Cab Wiring Harness
Inspection. Inspect the wiring for oilsoaked,
cracked, or frayed insulation, for broken wires, and for
loose or corroded connections.