TM 5-3810-207-20/TO 36C23-3-37-12
Figure 20. Fuel tank sending unit, removal and installation.
Harness repair. Repair a broken wire by
cutting a length of wire and taping it along
the harness. Install two clips at either end
and remove the broken wire of the
harness. Secure the end of the new wire
to the connection.
Cab wiring repair. Remove the broken
wire from the connection. Splice on the
length of wire needed for the repair,
making sure the splice is taped sufficiently
to prevent any short circuit in the wiring.
Position the spliced section of wire and
secure to the connection.