A. Timing gear cover, installed
Figure 28. Timing gear cover and timing gears, removal and installation.
diameter should measure between 2.9985
and 2.9995 inches.
(1) Install the crankshaft
(5) Inspect the crankshaft end play, it should
measure between 0.005 and 0.008 inch.
(6) Inspect the crankpin.
should measure between 2.560 and 2.561
The length should measure
between 1.6855 and 1.6875 inches.
(5) Install the oil pan and filler blocks (par.
Reassembly and Installation
(6) Install the flywheel and housing (par.
a. Reassembly. Reassemble the crane engine
(7) Install the front mount and pulley (par.