Figure 81. Carrier instrument panel, removal and installation.
solvent and dry thoroughly.
Carrier Cab Ventilators Removal
b. Inspect all parts for defects and damage.
Remove the carrier cab ventilators.
Replace all defective parts.
Carrier Cab Ventilators Installation
Install the carrier cab ventilators.
a. Clean all parts with an approved cleaning
Section III. CARRIER CAB AND WIRING HARNESS
b. Remove the engine hood, back panel, and cab
access panel (TM 5-3810-207-20).
c. Remove the instrument panel and wiring
The carrier has a sectional, welded steel,
weatherproof cab. The cab houses the driver's seat,
d. Remove the steering wheel (TM 5-3810-207-20).
steering wheel and column, engine controls, instrument
e. Remove the fuel priming pump (TM 5-3810-207-
panel, and wiring harness.
f. Remove the heater, control boxes, ducts, and
299. Carrier Cab and Wiring Harness Removal
cab thermostat (TM 53810-207-20).
a. Disconnect the battery ground cable (TM 5-