Section LXVII. CARRIER FRONT SPRING ASSEMBLY
The two front spring assemblies, one on each side, are
mounted with the arch down. A hanger is welded to the
frame side rail. The rear end of the spring lies in the
hanger. An eye on the front end of the spring is pinned
to the hanger welded on the frame side rail. The spring
leaves are held together by a bolt through the center of
each leaf. The leaves are held in alinement with two
clips. The front axle is secured to each spring with a
pair of U-bolts.
Figure 263. Carrier front axle housing and differential assembly, exploded view.