ENGINE CLUTCH. Inspect for proper operation. Adjust as necessary.
FUEL TANK. Add fuel as required. Tighten loose mounting. Replace a leaking fuel tank. Replace a
defective cap gasket.
OIL LEVEL GAGE. Add oil as indicated by level gage. Reference current L.O.
GENERATOR V-BELTS. Proper adjustment is a deflection of 1/2 inch midway between pulleys.
Replace a worn or frayed belt.
FAN V-BELTS. Proper adjustment is a deflection of 3/4 inch midway between pulleys. Replace a worn
or frayed belt.
RADIATOR. Proper coolant level is 2 inches below filler neck. Replace cracked or frayed hose.
Replace defective radiator. Remove obstructions in the air passages. Tighten all mountings, and
FUEL FILTER. Drain condensate. Replace filter element every 500 hours.
BOOM HOIST BRAKE. Inspect for proper operation. Adjust or replace a defective brake.
PLANATARY, MAIN AND SECONDARY CLUTCHES. Inspect for proper operation. Adjust or replace a
PROPEL DRIVE CHAIN.
Inspect for wear and proper tension.
Adjust as necessary.
CRAWLER TRACK AND SUPPORT ROLLERS. Replace excessively worn or damaged track shoes,
rollers or shafts, proper adjustment is I 1/2 inch minimum sag at ends of track rails.
NOTE 1. OPERATIONAL TEST. During operation check for unusual noises and proper operation.
NOTE 2. ADJUSTMENTS. Make all necessary adjustments during operational test.
MEC 3810-231-12/18 (3)
Figure 18 - Continued.