(5) Check clearance between crosshead and
or 0.027 inch (hot) between rocker arm and top of
valve spring retainer with a wire gage.
(4) Tighten locknut.
f. Turn crankshaft in direction of rotation to next
"VS" mark corresponding to firing order (1-5-4-8-6-3-7-2)
Clearance should be 0.020 - 0.025 inch.
of engine. Perform the injector, crosshead, and valve
adjustments for corresponding cylinder.
e. Adjust valves as follows:
(1) Loosen intake valve locknut, illustrated in
Air Cleaner (Model 2380)
of 0.016 inch (cold) or 0.014 inch (hot) between rocker
arm and top of crosshead.
a. Removal and Disassembly.
(2) Tighten locknut.
(3) Loosen exhaust valve locknut, and turn
(1) Remove the carrier engine air cleaner as
adjusting screw to obtain clearance of 0.029 inch (cold),
Figure 4-17. Carrier engine air cleaner, removal and installation (Model 2380)