b. Cleaning and Inspection.
order of removal. Check hydraulic oil level as de-
scribed in Lubrication Order.
(1) Clean all metal parts. Discard gaskets and
4-127. Manifold, Control Valves, and Related
(2) Inspect all parts for cracks or other damage.
Replace defective parts and install new gaskets and
a. Removal (Model 2380). Remove manifold, con-
trol valves, and related parts as illustrated in figure
c. Reassembly. Reassemble hydraulic oil filter in
reverse order of disassembly.
e. Installation. Install hydraulic oil filter in reverse
Figure 4-114. Manifold, control valves, and related parts,
removal and installation (model S80).