Sleeve and bushing assembly
147 Split washer
Figure 3-8. (4) Continued.
d. Refer to TM 5-764 for armature and field coil
3-10. Cleaning, Inspection and Repair
a. Clean all metal parts with an approved cleaning
3-11. Reassembly and Installation
solvent and dry thoroughly.
b. Remove all dust, dirt, and foreign matter from
the frame and fields using compressed air.
reassemble the starting motor assembly.
c. Inspect all parts for excessive wear or other
b. Installation. Refer to TM 5-3810-232-12.
damage. Repair or replace all defective parts.
Section IV. CARRIER BATTERY BOX ASSEMBLY
b. Disassembly. Disassemble the battery box (fig.
3-12. Removal and Disassembly
a. Removal. Remove battery box assembly (TM 5-