Figure 4-2. Hydraulic Oil Level
If damaged components are found, they should be
DRAIN AIR TANKS
replaced or repaired before the machine is placed in
Open the drain cock on the bottom of each air tank daily,
or as frequently as is found necessary, to blow out
CHECK MACHINE FOR LEAKS AND DAMAGE
moisture and accumulated sediment.
Make a complete visual inspection of the entire machine,
INSPECT WIRE ROPE FOR DAMAGE
looking for leaks, loose connection, or any other unsafe
condition. Repair or replace any faults which are found
Inspect the wire rope, wire rope sockets, and any other
before placing the machine in service.
wire rope fitting for damage. A wire rope inspection form
has been provided at the end of this maintenance check
to assist the inspector.