Minor breaks or cracks in hoses or duct may be patched
Cleaning, Inspection and Repair
with heavy-duty fabric tape.
7-14. Reassembly and Installation
Do not immerse heater in cleaning solvent.
a. Refer figure 7-3 and 7-4 and reassemble
a. Unclog air ducts and chambers. Clean parts
the heater lines and heater assembly.
and dry thoroughly.
b. Refer TM 5-3810-295-12 to install, service
b. Inspect heater for damage. Inspect air ducts
and reconnect the heater assembly.
and hoses for cracks, breaks or other damage.
c. Straighten dents and bends on air ducts.