REPAIR OF HYDRAULIC STEERING CYLINDERS
There are three hydraulic cylinders used in each of the
tandem unit steering cylinder and (3) steering cylinder
front wheel steering and rear wheel steering systems.
are located as shown on figure 17-16.
The three cylinders: (1) self-centering cylinder, (2)
Figure 17-16. Hydraulic steering cylinders
17-23. Removal and Disassembly
a. Refer to figure 17-17 and remove and
(2) Remove nut (1) and (2). Remove cylinder assembly
disassemble the self-centering cylinders as follows:
(1) Tag and remove all hydraulic lines.
(3) Remove screws (3), lock washers (4) and
stop plate (5).