PREPARATION FOR TRAVEL.
Fully retract the boom and firmly position it in the boom rest.
Engage the swing (house) lock.
If the machine is rigged, attach the hook block to the snubber line attached to the carrier tow rings.
Tighten the cable sufficiently to prevent excessive hook and cable movement during travel.
DO NOT TRAVEL WITH THE HOOK IN A POSITION WHERE IT CAN SWING FREELY.
5. Fully retract the outrigger jacks and beams.
6. Remove the jack floats. Stow and secure.
7. Make the final inspection to make certain no loose equipment has been overlooked. Close and
secure all compartments.
PUMP DRIVE MUST ALWAYS BE DISENGAGED BEFORE TRAVEL.