TM 5-3810-300-24&P-3
1.7.7 ACCESSORY DRIVE
Fig. 4 - Components of Accessory Drive for Belt Driven Accessory (Drive Hub Type)
also incorporates an oil seal, is bolted to the flywheel
2. Remove five bolts and lock washers attaching the
housing. The pulley is keyed to the drive shaft which
accessory to the flywheel housing.
Pull the
extends through the drive retainer assembly.
accessory straight out from the flywheel housing.
3. Remove the drive hub or the drive coupling from the
accessory shaft.
Remove Accessory Drive
4. Place a clean, lintless cloth in the flywheel housing
The gear driven type accessory drive may be removed
opening, underneath the accessory drive plate, to
as follows:
prevent bolts from accidentally falling into the gear
train. Remove the lock wires, if used. Then, remove
1. Remove any external piping or connections to the
four bolts (and
accessory.
Fig. 5 - Components of Accessory Drive for Belt Driven Accessory (Drive Plate Type)
Page 138