pected. Leave the drains open.
NOTE
When prolonged engine idling is
necessary, maintain at least 800
bring it to the proper level on the dip-
rpm.
stick.
INSPECTION. Make a visual check for
leaks in the fuel, lubricating and cooling
Stopping
systems.
NORMAL STOPPING. Stop the engine as
CLEAN ENGINE. Clean and check the
follows:
engine thoroughly to make certain it will
be ready for the next run.
1. Release the load and decrease the en-
gine speed. Put all shift levers in the
Refer to Section V of operator's manual
neutral position.
and perform all of the daily maintenance
operations. Also perform the operations
2. Allow the engine to run at half speed
required for the number of hours or
or slower with no load for four or five
miles the engine has been in operation.
minutes, then move the stop lever to the
stop position to stop the engine.
Make the necessary adjustments and mi-
EXHAUST SYSTEM. Drain the condensa-
nor repairs to correct difficulties which
may have occurred during the pervious
run.
system if it is not protected with anti-
freeze and freezing temperatures are ex-
Engine Tune-Up