Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM TO BE
Figure 2. Air Cleaner Element Maintenance.
a. Warm engine oil prior to draining.
Oil and Oil Filter
b. Place a suitable container under oil filter.
c. Using a strap wrench, remove oil filter.
d. Place a suitable container under engine oil pan
and remove drain plug. Engine holds 10 qt (9.46 L).
Drain engine oil.
e. Install drain plug, torque to 60 ft-lb (81 N·m) and
fill with 10 qt (9.46 L) of engine oil (TM 5-3810-305-10).
f. Coat oil filter seal with clean engine oil, fill oil filter
with oil, and install hand-tight. Oil filter holds 1 qt (0.95
g. Start engine and run for approximately 5 minutes.
Check for leaks.