Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
Transmission to Engine
Examine 12 capscrews (Figure 19, Item 2) for damaged threads. Check flywheel ring gear (Figure 19, Item 1)
for condition before attaching transmission (Figure 19, Item 3).
Figure 19. Transmission to Engine Installation.
Using a dial indicator, check engine crankshaft end play. It should be from 0.005 to 0.010 inch
(0.13 to 0.25 mm). Crankshaft end play should be the same after attaching the transmission.
Install 3/8-24 x 2 1/4 threaded guide stud, with a screwdriver slot in end, into one of the threaded inserts on
converter drive plate from engine side.
Rotate flywheel until one of the holes in flywheel is aligned with flywheel access hole.