ASSEMBLY - Continued
Lubricate all o-rings and oil seals with lubricating oil, prior to installation. Use a sealing
compound on outside surface of oil seals and a light coat of thread sealing compound
on pipe threads. Avoid getting thread compound inside parts or passages which conduct
Install bearing (Figure 15, Item 4) and new seal (Figure 15, Item 3) in drum (Figure 15, Item 5).
Install new seal (Figure 15, Item 3) with spring side of seal away from bearing, and press into drum
(Figure 15, Item 5).
Install o-ring (Figure 15, Item 2) and drain plug (Figure 15, Item 1) securely in drum (Figure 15, Item 5).
Weight of winch is approximately 300 lb (136 kg). Use adequate lifting equipment to lift and
support winch. DO NOT lift over personnel or let personnel walk underneath suspended load.
Failure to follow this warning may cause injury or death to personnel.
Install drum (Figure 16, Item 1) into opening of base (Figure 16, Item 2).