REMOVAL - Continued
Remove capscrew (Figure 3, Item 2), lockwasher (Figure 3, Item 3), and rod end (Figure 3, Item 4).
Using a brass drift pin, remove pin (Figure 3, Item 5) by driving pin through frame, inside cab.
Weight of outrigger cylinder assembly is approximately 125 lb (57 kg). Use adequate lifting
equipment to lift and support outrigger cylinder assembly. DO NOT lift over personnel or let
personnel walk underneath suspended load. Failure to follow this warning may cause injury
or death to personnel.
Using hoist and sling, remove outrigger cylinder assembly (Figure 3, Item 1).
Figure 3. Outrigger Cylinder Removal.
END OF TASK