Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may result in injury or death to personnel.
Weight of hydraulic reservoir is approximately 190 lb (86 kg).
Using suitable hoist and sling, lift and position hydraulic reservoir (Figure 5, Item 4) in carrier.
Install eight locknuts (Figure 5, Item 1), washers (Figure 5, Item 2), plug (Figure 5, Item 3), new o-ring
(Figure 5, Item 4), cover (Figure 5, Item 5), new o-ring (Figure 5, Item 6), filter (Figure 5, Item 7), and new
o-ring (Figure 5, Item 8) from reservoir.