TM 5-3810-306-10
3.
Check washer fluid level in bottle in the valve
compartment and fill if needed.
CAB HEATER/DEFROSTER
1.
Inspect for fuel leaks, exhaust leaks and rust
corrosion.
CAB HEATER FUEL TANK
1.
Inspect fuel supply. If low, add diesel fuel.
2.
Inspect for fuel leaks, loose mounting, loose tubing
and fillings, etc.
HYDRAULIC SYSTEM
HYDRAULIC CONTROL VALVES
1.
Ensure all components are secure and there are no
leaks.
STRAINERS,
FILTERS,
LINES
AND
FITTINGS
SERVICE
1.
Ensure all components are secure and there are no
leaks. Check filter indicator on hydraulic reservoir; if
white indicator is at or below the halfway mark on the
window have Organizational Maintenance replace
filter element.
HYDRAULIC LIFT CYLINDERS
1.
Ensure all components are secure and not leaking.
2.
Inspect cylinder rod for dirt and/or scoring.
3.
Inspect oil seals for accumulated dirt and clean if
needed.
HYDRAULIC TELE CYLINDER
1.
Ensure all components are secure and not leaking.
2.
Inspect cylinder rod for dirt and/or scoring.
3.
Inspect oil seals for accumulated dirt and clean if
necessary.
HYDRAULIC RESERVOIR
1.
Inspect reservoir level sight gauge. If level is low,
add oil. Inspect breather cap on top of the reservoir;
clean if necessary.
LOAD MOMENT INDICATOR (LMI) SYSTEM
1.
Inspect inter-connecting electrical cables for damage
and security.
2.
Inspect length sensor cable for damaged insulation.
3.
Inspect cable guides for damage that may cause
damage to length sensor cable and for security.
4.
Check for freedom of movement of anti-two block
switches.
5.
Check that cable reel is operating under tension.
6.
Inspect the pressure transducers for hydraulic leaks
and damaged hoses.
CRANE ATTACHMENTS
BOOM INSPECTION
3-29