OPERATOR PMCS (CONTD)
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE
EQUIPMENT IS NOT
NO
B
D
A
W
M
REPAIRED FILLED, OR ADJUSTED. . .
READY/AVAILABLE IF:
1
ENGINE OIL LEVEL
.
Check engine oil level. Maintain oil
Engine oil low;
level between "Add and Full" mark on
Class III leaks
the dipstick (left side of engine).
exist.
WARNING
The cooling system is pressurized.
Personal injury may result when
removing the radiator cap after
operating temperature is reached.
Do not remove radiator cap when
radiator is hot to touch.
2
ENGINE COOLANT
.
Check coolant level, maintain
coolant level at "Full" mark on
recovery tank sight gauge. Add
coolant through the overflow tank
cap filler tube.
3
SEDIMENT BOWL
.
Check sediment bowl for dirt/water.
Sediment bowl is
The bowl is located on the left rear
missing/broken.
inner frame rail.
4
FUEL FILTER
CAUTION
Drain fuel into a container, not on
the ground.
.
Check for water in primary fuel filter
Class II leak
by opening the petcock (right side of
exists.
engine) to drain water. Do not
overtighten petcock!
5
AIR TANKS
.
Open two secondary air tank drain
Air/leak exists.
cocks slightly to drain water. Push
automatic drain valve on primary air
tank.
2-18
TM 5-3810-306-10
OPERATOR PMCS (CONTD)