INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE
EQUIPMENT IS NOT
NO
B
D
A
W
M
REPAIRED FILLED, OR ADJUSTED. . .
READY/AVAILABLE IF:
6
TIRES
.
Check tires for excessive wear, cuts,
Any tire missing,
cracks, low or flat tires (75 psi).
flat or
unserviceable.
7
WIRE ROPE
.
Inspect wire rope, rope sockets and
See Page 2-36 for
fitting for damage, wear, corrosion,
wire rope not
heat damage and lubrication.
ready criteria.
8
FUEL TANK AND LINES
.
Check for fuel leaks
Class II leaks
exist.
9
DRIVE BELT
.
Check belt for loose, broken, cracked
Belt damaged or
or frayed condition. Belt should
missing.
deflect approximately 1/2" at mid
span. Note: Belt tension is
maintained by automatic belt
tensioner.
10
WINDSHIELD WIPERS AND WASHER BOTTLE
.
a.
Check for proper operation;
condition of arms and blades.
.
b.
Check fluid level in windshield
washer bottle (in valve
compartment).
11
SEAT BELTS
.
Check seat belts for damage; proper
operation
12
CAB HEATER
.
Check that fuel tank (located behind
Class II leaks
cab on turntable) is full and sediment
exist.
bowl is free of contaminents.
2-19