AIR CLEANER ASSEMBLY
General mechanics tool kit: automotive (5180-00-177-7033)
Disconnect ground cable at shunt.
(Refer to page 8-109).
REMOVE ELEMENTS (5) AND (7). REMOVE
VACUATOR VALVE (8).
Both air cleaners on either side of
engine should be serviced at the
a. Remove end cover assembly (2) from air cleaner
body (3) by unscrewing wing nut (1).
b. Remove outer wing nut (4) and pull primary
element (5) from air cleaner body (3).
c. Remove inner wing nut (6) and remove safety
d. Remove vacuator valve (8).
e. Loosen clamp (9) and remove air inlet hood (10).
Compressed air used for cleaning
purposes will not exceed 30 psi. Use
only with effective chip only with