Position muffler exhaust elbow (9) through engine
hood and secure mounting bands (19) to engine
hood with four capscrews (18), new lockwashers
(17) and nuts (16).
Install muffler guard (11) under top of hood and on
side of engine hood. Secure sides with six
screws (12) and washers (13). Tighten five bolts
to secure top of hood and muffler guard.
Remove rag and install exhaust elbow (5) and
clamp (4) on exhaust connection (3).
Install exhaust hose (8) and sealing clamps (7)
between both exhaust elbows (9 and 5). Tighten
INSTALL RADIATOR GRILL. (REFER TO PAGE
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
START ENGINE AND TEST FOR PROPER
OPERATION. (REFER TO TM 5-3810-30610.)
END OF TASK