Section II. STARTER MOTOR MAINTENANCE
STARTER MOTOR INSTALLATION
TOOLS: General mechanics tool kit: automotive (5180-00-177-7033)
Clean rags (Item 1, Appendix C)
Lockwashers (Item 7, Appendix C) (3 Required)
Lockwashers (Item 16, Appendix C) (2 Required)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Engine oil filter removed. (Refer to page 4-5.)
Turbocharger oil return line removed. (Refer to page 4-6.)
REMOVE STARTER MOTOR ASSEMBLY (1).
Tag and disconnect electrical leads on starter
motor (1) and solenoid. Discard all lockwashers.
Support starter motor (1) and remove three
capscrews (2), washers (3) and grounding cable
Do not force starter motor out if
starter drive is jammed in flywheel.
Carefully remove starter motor (1).
If necessary, bar engine slightly to
free starter motor (1).
Cover hole in flywheel housing with clean rags.