TOOLS: General mechanics tool kit: automotive (5180-00-177-7033)
Lockwashers (Item 2, Appendix C) (4 Required)
EQUIPMENT CONDITIONS: None
REMOVE SHUNT (1).
Remove capscrews (2) at shunt and disconnect
cables (3) from shunt.
Tag and disconnect two meter wires from shunt
Remove four nuts (4) and lockwashers (5);
remove shunt from mounting studs. Discard
INSTALL SHUNT (1).
Position shunt (1) on mounting studs and secure
with four new lockwashers (5) and nuts (4).
Connect cables (3) to shunt (1) with capscrews
Connect two meter wires to shunt (1) as tagged.
END OF TASK