TORQUE CONVERTER OIL FILTER INSTALLATION
General mechanics tool kit: automotive (5180-00-177-7033)
Clean rags (Item 1, Appendix C)
Hydraulic oil (Item 6, Appendix C)
Oil filter element (Item 4, Appendix C)
Disconnect ground cable at shunt. (Refer to page 8-109.)
DRAIN FILTER HOUSING (1).
a. Wipe area around oil filter housing (1) with rag.
b. Put drain pan under filter housing (1).
c. Remove drain bolt (2). When completely
drained, do step d.
d. Install drain bolt (2) in filter housing (1).
REMOVE FILTER ELEMENT (4) AND GASKET (6).
Bolt (3) should not be removed from
filter housing (1).
a. Hold filter housing (1) in place.
b. Unscrew bolt (3) until filter housing (1) is
removed from head assembly (5).
c. Lower filter housing (1).
d. Pull filter element (4) from filter housing (1).
Remove gasket (6) and discard.