Section III. EMERGENCY STEERING PUMP MAINTENANCE
EMERGENCY STEERING PUMP REPLACEMENT
TOOLS: General mechanics tool kit: automotive (5180-00-177-7033)
Preformed packing (Item 82, Appendix C)
Preformed packing (Item 83, Appendix C)
Preformed packing (Item 85, Appendix C)
Preformed packing (Item 84, Appendix C)
Lockwasher (Item 15, Appendix C)
Loctite #545 (Item 13, Appendix C)
Hydraulic oil (Item 6, Appendix C)
EQUIPMENT CONDITIONS: Discount ground cable at shunt. (Refer to page 8-109)
REMOVE EMERGENCY STEERING PUMP (1).
Tag and disconnect electrical connectors from
Tag and disconnect 2 hydraulic lines and
preformed packing from pump. Cap hoses.
Remove fittings and preformed packings from
pump ports. Replace as necessary.
Remove four nuts and (2) and lockwashers (3)
securing pump and drive motor.
Remove pump and drive motor (1).
INSTALL EMERGENCY STEERING PUMP (1).
Position pump and drive motor over studs and
secure with lockwashers (3) and nuts (2).