HYDRAULIC RESERVOIR REPLACEMENT
General mechanics tool kit: automotive (5180-00-177-7033)
Lifting device (2 ton (1812 Kg) capacity)
Clean rags (Item 1, Appendix C)
Preformed Packings (As Required)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
All hydraulic systems are shut down.
Hydraulic reservoir is empty.
Area near hydraulic hoses is clean and free of debris.
Hydraulic tank cover assembly removed. (Refer to page 15-22.)
Emergency hand pump removed. (Refer to page 16-46.)
REMOVE HYDRAULIC RESERVOIR (1).
a. Tag and disconnect all hydraulic lines from back
of reservoir. Plug lines and openings.
b. Remove four locknuts (5) and flatwashers (4) to
free strap (3) on reservoir (1).
c. Lift tank from support bracket (6) with lifting
INSTALL HYDRAULIC RESERVOIR (1).
a. Lift and place reservoir (1) on support bracket
(6). Secure straps (3) with locknuts (5) and
b. Remove plugs and ensure preformed packings
in hydraulic lines are not damaged. Replace if
c. Remove tags and install hydraulic hoses to