TOOLS - BUNDLED TOGETHER
Ten-Pound Sledge Hammer
5-Foot Steel Bar
Figure H-13. Pile Driver System Pre-Assembly Inventory Components (Sheet 4 of 4)
Spare Tire Removal
It is necessary to remove the spare tire before installing the Pile Driver System on the crane.
Otherwise the spotter cannot be installed and operated properly. Retain all spare tire attaching
hardware for installation later. Use the five-ton headache ball on the pile line (aux. hoist) and
the spare tire handling (lifting) sling, located in the crane tool box, to remove the spare tire. Set
the spare tire down well away from the immediate work area.
H-40 Change 1