If removed, install mount (10) on joystick assembly (6) with screws (9), washers (8), and locknuts (7).
Install joystick assembly (6) with mount (10) in top cover (2) of arm rest with screws (4) and threaded
Connect hydraulic lines to fittings of joystick assembly (6) and remove tags.
Connect electrical leads for joystick assembly (6) and remove tags.
Slide bottom cover (3) onto arm rest and secure top cover (2) to bottom cover (3) with screws (1).
If removed, install joystick instruction plate and secure with screws and nuts.
With engine running at governed rpm, operate both functions controlled by the control valve. Check the valve for
proper operation and leaks.