LUBRICATION
ORDER
LO5-3810-206-12-2
26 MARCH 1971 (Supersedes LO5-3810-201-12-2, dtd 9 Feb 1968 and LO5-3810-206-12-2, dtd 18 Mar 1968)
CRANE-SHOVEL, BASIC UNIT, CRAWLER MOUNTED, 40 TON, 2 CU YD
DIESEL DRIVEN, (HARNISCHFEGER MODEL 855 BG, 855 BG-2 AND
855 BG-3) W/HARNISCHFEGER ENGINE MODEL 687C-18-ES AND
CATERPILLAR ENGINE MODELS D333TA AND D333C
Reference LO5-3810-206-12-1, -3, -4 and 5 C9100-IL
Intervals are based on normal hours of operations.
Adjust to compensate for abnormal operations and
Clean parts with SOLVENT, dry-cleaning, or with OIL,
severe conditions. During inactive periods sufficient
fuel, Diesel. Dry before lubricating.
lubrication must be performed for adequate preservation.
Clean fittings before lubricating.
Lubricate points indicated by dotted arrow shafts on both
A dottrd circle indicates a drain below.
sides of equipment.
Relubricate after washing or fording.
FOLD
FOLD
INTERVAL LUBRICANT
LUBRICANT INTERVAL
Pierce Governor Drive
Fan Hub
1000 GAA
Gear
brication required
Crankcase Fill Cap
(See Key.)
HDO
brication required.)
Oil filters
(See key) (Disassem-
100
100
ble, clean housing and
Oil filter Drain Plugs
renew element) (See
(Drain sediment every
note 4.)
50 service hours)
100
500 HDO
(Drain and refill)
Starter Outboard Bearing
(Sparingly)
Crank level Dip-
10
Stick
(Check level)
10 HDO
CAUTION: When OES
Air Cleaner
oil is used the level
(See key) (Check and
will be checked more
refill oil reservoir to
often.
level mark) (Every 50
HDO 500
service hours, disassem-
Starter Inbound Bear-
ble entire unit, clean,
ing
fill and reassemble.
(Remove motor and
fill oil cup located in-
ENGINE MODEL 687 C-18-E
side case) (Sparingly)