LO 5-3810-288-12
* KEY
EXPECTED TEMPERATURES
Above +15 F
+ 40 F to -15 F
+40 F to -65 F
LUBRICANTS
CAPACITY
INTERVALS
(Above -9 )
(+ 4 to -26 )
(+4 to -54 )
GO
-
Gear and
72 qts.
GO 85W/140
GO 80W/90
GO 75W
C/MR -
Chain Case
(68.11 L)
Condition
Monitor
-
Tagline
4 qts.
(3.78 L)
BFS
-
Brake Fluid,
Silicone,
Automotive
ALL TEMPERATURES
-
Hydraulic
Intervals
Control
Reservoir
given are
in hours
CW
-
Lubricating
CW-IIB
CW-IIB
CW-IIB
Oil, Chain,
of normal
Wire Rope,
Exposed
operation.
Gear
OHT
-
Hydraulic
Fluid,
Petroleum
Base,
ALL TEMPERATURES
-
Hydraulic
1-1/2 qts.
Steering
(1.4 L)
System
GAA -
Grease,
Automotive
ALL TEMPERATURES
and Artillery
*See Note 16 for lubricant specification number.
NOTES:
2. OIL CAN POINTS.
Each 50 hours lubricate
1. FOR
OPERATION
OF
EQUIPMENT
in
accelerator shaft, governor linkage, air brake treadle
PROTRACTED COLD TEMPERATURES BELOW-
roller and hinge pin, clutch pedal linkage, door latches
and hinges, yoke pins and clevises, springs, fasteners
15F (-26C). Remove lubricants prescribed in Key for
and all exposed adjusting threads with OE/HDO,
temperatures above -15F (-26C). Relubricate with
except those adjusting threads coming in contact with
lubricants ) specified in Key for temperatures below
excavated material.
15F (-26C). If OEA lubricant is required -to meet
the temperature ranges prescribed in the Key, OEA
3. CRANKCASE OIL LEVEL HOT
OR
COLD
lubricant is to be used in place of OE/HDO-10 lubricant
CHECK (CARRIER AND CRANE).
for all temperature
ranges where OE/HDO-10 is
specified in the Key.
TA221890
LO 5-3810-288-12
CARD 11 OF 13
