TM 10-1670-251-12&P
(6) When the item is not used with all serial numbers
of the same model, the effective serial numbers
are shown on the last line(s) of the description
(before UOC).
(7) The usable on code, when applicable (see
paragraph 5, Special Information).
(8) In the Special Tools List section, the basis of
issue (BOI) appears as the last line(s) in the entry
for each special tool, special TMDE, and other
special support equipment. When density of
equipments supported exceeds density spread
indicated in the basis of issue, the total
authorization is increased proportionately.
(9) The statement "End of Figure" appears just belowthe
last item description in Column 5 for a given
figure in Section II.
f. Qty (Column (6)). The Qty (quantity per figure)
column indicates the quantity of the item used in the
breakout shown on the illustration figure, which is
prepared for a functional group, subfunctional group, or
an assembly. A "V" appearing in the column in lieu of a
quantity indicates that the quantity is variable and may
vary from application to application.
C-4. Special Information.
a. The "Usable on Code" title appears in the lower right
corner of column (5) Description. Usable on codes are
shown in the right-hand margin of the description
column.
C-13
