TM 10-1670-295-23&P2-9. Painting.This task covers: PaintingTools:Personnel Required:Brush, paint, 1-in Item 1, Appendix BMaterials/Parts:Paint, OD, Item 16, Appendix DPainting.(1)Count ten links from end of chain.(2)Using a 1-in. paint brush and olive drab paint permanently paint tenth links of chain.(3)Repeat for each subsequent tenth link.2-10. Searing.This task covers: SearingTools.Electric Pot, Melting, Item 7, Appendix BKnife, Metal, Hot, Item 4, Appendix BNOTEFabric materials such as cord, tape, and webbing that are cut for use in themaintenance of parachutes will normally be heat-seared, to prevent the materialfrom fraying or unraveling. However, in some instances the preparation of thematerial may not be necessary and will be specified accordingly.Searing. The cut ends of nylon tape, webbing, and cord lengths may be prepared by heat-searing whichis performed by pressing the raw end of the material against a hot metal surface (knife) until the nylon hasmelted sufficiently. Avoid forming a sharp edge or lumped effect on the melted end.2-7
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business