TM 10-1670-298-20&P
Recoverability
Codes
Application/Explanation
Z-
Nonreparable Item. When unserviceable, condemn and dispose of the item at the
level of maintenance shown in 3d position of SMR Code.
O-
Reparable item. When not economically reparable, condemn and dispose of the
item at unit or AVUM level.
F-
Reparable item. When uneconomically reparable, condemn and dispose of the item
at the direct support or AVIM level.
H-
Reparable item. When uneconomically reparable, condemn and dispose of the item
at the general support level.
D-
Reparable item. When beyond lower level repair capability, return to depot
Condemnation and disposal of item not authorized below depot level.
L-
Reparable item. Condemnation and disposal not authorized below specialized repair
activity (SRA).
A-
Item requires special handling or condemnation procedures because of specific
reasons (e.g., precious metal content, high dollar value, critical material, or
hazardous material). Refer to appropriate manuals/directives for specific
instructions
c. CAGEC (Column (3)). The Commercial and Govemment Entity Code (CAGEC) is a 5-digit numeric code which
is used to identify the manufacturer, distributor, or Govemment agency/activity that supplies the item.
d. PART NUMBER (Column (4)) Indicates the primary number used by the manufacturer, (individual, company,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the Item you receive may have a different part number from the number
listed.
e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)) This column includes the following information:
(1)
The Federal item name and, when required, a minimum description to identify the item.
(2)
Part numbers of bulk materials are referenced In this column In the line entry to be
manufactured/fabricated.
(3) The statement "END OF FIGURE" appears just below the last item description In Column (5) for a given
figure in both Section II and Section III.
f.
QTY (Column (6)). The QTY (quantity per figure) column indicates the quantity of the item used in the breakout
shown on the illustration/figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V"
appearing in this column instead of a quantity indicates that the quantity is variable and may vary from application to
application.
C-4
