CHAPTER 3
REPAIR OF CRANE
Section I. BOOM.
3-1. Boom Topping Cylinder
a. Removal.
and washers securing pins (4) and (8).
(1) Lower boom (TM 10-3950-203-10) and
(4) Support the cylinder and remove the pins.
provide a suitable support for it.
Remove the cylinder.
(2) Disconnect hydraulic hoses from topping
b. Disassembly. Refer to figure 3-1 and starting
cylinder.
it the cylinder base end (13), disassemble the
(3) Refer to figure 3-1 and remove capscrews
cylinder to the extent required to repair the
cylinder.
3-1
