TM 10-3950-206-12
Figure 4-62. Boom side wear plates adjustment points.
Section XX. SEAT AND FRAME MAINTENANCE
(1) Remove four nuts (7, fig. 4-63) and
4-81. General
lockwashers (6).
The crane is equipped with a single operator's seat
(2) Lift assembled seat and slides from seat
mounted on the left side of the frame. The engine
support
compartment is completely enclosed with hood panels,
b. Disassembly.
with easily removed side access panels. Hinged access
(1) Remove seat cushion (1) by lifting from
panels are provided for access to the hydraulic tank,
frame.
batteries, transmission slewing cylinders, propeller shaft,
(2) Remove two screws (4) and back cushion
and hydraulic oil filters. The access door to the fuel filter,
from frame.
hydraulic control valve, and steering valve is accessible
(3) If replacement is required remove four
after removing the step on the left side of frame.
nuts and lockwashers that secure slide assembly (5) to
4-82. Seat Assembly
seat frame (3).
a. Removal.
4-62
