Figure 3-63. Governor throttle control linkage, removal and installation.
excessive wear, or other defect. Inspect gaskets and
remove blower adapters. Install in reverse order.
hose for deterioration or other defect. Inspect mounting
b. Cleaning, Inspection, and Repair.
hardware for burs, stripped threads, or other defects.
(1) Clean all parts in an approved cleaning
(3) Repair by replacing defective component or
solvent and dry throughly.
mounting hardware.
(2) Visually inspect all parts for dents, cracks,
Figure 3-64. Primer pump (for engine model 687C-18-ES) removal and installation.
3-76
