TM 5-3810-207-20/TO 36C23-3-37-12
Figure 209. Thermostat, removal and installation.
Section II. CARRIER ACCESSORY EQUIPMENT
335. Winter Front
a.
Removal.
(1)
Remove boom cradle (par. 171).
(2)
Remove carrier engine winter front as
instructed on figure 210.
b.
Cleaning and Inspection.
(1)
Clean all parts with an -approved cleaning
solvent and dry thoroughly.
(2)
Inspect for breaks, bends, and other
damage. Replace damaged winter front
as necessary.
(3)
Inspect for proper operation. Replace a
defective winter front as necessary.
c.
Installation.
(1)
Install the carrier engine winter front as
illustrated on figure 210.
(2)
Install the boom cradle (par. 171).
336. Cab Windshield Wiper
a.
Removal. Remove the windshield wiper as
instructed on figure 211.
b.
Cleaning and Inspection.
(1)
Clean all parts with a cloth dampened with
an approved cleaning solvent and dry
thoroughly.
(2)
Inspect for breaks, bends, and other
damage. Replace damaged parts as
necessary.
(3)
Inspect for proper operation, Replace
defective windshield wiper as necessary.
c.
Installation. Install the windshield wiper as
illustrated on figure 211.
270
