Removal and replacement
Man/hours
Removal and replacement
Man/hours
hoses, sending units, starter,
(Engine removed includes
hydraulic pump, exhaust pipe
removal and replacement of
and muffler, disconnection and
cylinder head, oil pan, and oil
reconnection of fuel lines,
pump.)
throttle linkage, choke cable,
Bearings, rod----------------------------- 5.0
wiring at generator and starter,
(Engine removed - includes
air lines at compressor, linkage
removal and replacement of oil
at clutch and transmission, and
pan and oil pump.)
propeller shaft at transmission;
Connecting rods ---------------------- 14.00
also includes removal and
(Engine removed - includes
replacement of transmission
removal and replacement of
and clutch from engine.)
pistons.)
0101
CRANKCASE, BLOCK,
0105
VALVES AND TIMING SYSTEM
CYLINDER HEAD
0105.1 VALVES
Block ------------------------------------ 33.0
Valves ----------------------------------- 9.3
(Engine out of unit-includes
(Includes removal and replace-
removal and replacement of
ment of cylinder head and rocker
cylinder head, flywheel, timing
arms.)
gear cover, oil pan, pistons,
Valve seats ------------------------------10.0
crankshaft, camshaft, tappets,
(Includes removal and replace-
and externally mounted
ment of valves.)
accessories.)
Springs; guides and locks ------------10.0
Cylinder head --------------------------- 10.0
(Includes removal and replace-
(Includes removal and replace-
ment of valves.)
ment of manifolds, water mani-
0105.2 ROCKER ARMS, TAPPETS
fold, rocker arms, and valves.)
Rocker arms --------------------------- 2.1
0102
CRANKSHAFT
(Includes removal and replace-
Crankshaft assembly ---------------- 9.3
ment of throttle linkage, brea-
(Engine out of unit-includes
ther housing, and rocker arm
removal and replacement of
covers.)
timing gear cover, flywheel and
Gaskets and covers -------------------- 0.8
housing, oil pan, oil pump filler
(Includes removal and replace-
blocks, and disconnection and
ment of throttle linkage and bre-
reconnection of connecting
ather housing.)
rods.)
Push rods ------------------------------- 3.1
Bearings, main ------------------------ 3.8
(Includes removal and replace-
(Engine out of unit includes
ment of rocker arms.)
removal and replacement of oil
Tappets---------------------------------18.5
pan and oil pump.)
(Includes removal and replace-
Damper --------------------------------- 0.6
ment of camshaft.)
Drive pulley----------------------------- 5.0
0105.3 CAMSHAFT
Crank-jaw ------------------------------- 0.3
Camshaft-------------------------------18.0
0103
FLYWHEEL ASSEMBLY
(Engine removed - includes
Flywheel (engine installed) --------- 7.0
removal and replacement of oil
(Includes removal and replace-
pump, accessory drive unit,
ment of clutch and trans-
cylinder head, fuel pump, timing
mission.)
gear cover, and push rods.)
Flywheel (engine out of unit) --------- 0.9
Bushings -------------------------------20.0
0104
PISTON, CONNECTING RODS
(Engine removed - includes
Piston; Rings; Pins; Retainers ---- 14.0
removal and replacement of
camshaft.)
0105.5 TIMING GEARS
Gears, timing -------------------------- 5.1
(Engine removed - includes
removal and replacement of fan,
dampener, crankshaft pulley, and
timing gear cover.)
TAGO 5030A
18
