(1)
Clean all parts with an approved cleaning
283. Radiator Shutter
solvent and dry thoroughly.
a. Removal and Installation. Remove and install the
(2)
Inspect the windshield wiper motor for
radiator shutter as instructed on figure 174.
breaks, bends or other damage. Repair or
b. Cleaning and Inspection.
replace damaged hardware.
(1)
Clean the radiator shutter with an approved
(3)
Inspect the motor for proper operation.
cleaning solvent and dry thoroughly.
Replace a defective motor.
(2)
Inspect the, radiator shutter for breaks
,
c. Installation. Install the windshield wiper motor as
bends, and other damage.
Repair or
illustrated on figure 175.
replace damaged radiator shutter and
286. Crane Engine Air Compressor
mounting hardware as necessary.
284. Crane Windshield Wiper Blade
mounted on a bracket below the generator and is V-belt
a. Inspection. Inspect the crane windshield wiper
driven from the engine. Its purpose is to supply air to
blade for cracks, bends, and deterioration or cuts.
operate the windshield wiper on the crane cab.
Replace a defective wiper blade as necessary.
b. Removal and Installation. Remove and install
b. Removal. Remove the crane windshield wiper
compressor assembly as Instructed on figure 176.
blade as illustrated on figure 175.
c.
Cleaning and Inspection.
c. Installation. Install the crane windshield wiper
(1)
Clean the compressor with an approved
blade as illustrated in figure 175.
cleaning solvent and dry thoroughly.
285. Crane Windshield Wiper Motor
(2)
Inspect the compressor for cracks, breaks,
a. Removal. Remove the windshield wiper motor as
and other damage.
instructed on figure 175.
(3)
Replace a defective or damaged com-
b. Cleaning, Inspection, and Repair.
pressor.
AGO 6819A
188
