SAFETY PRECAUTIONS
Before Operation
Disengage master clutch.
Be sure equipment is on firm base or mats are used under crawlers.
Make certain all adjustments have been properly made and hook block is sufficiently rigged.
Make certain equipment is free of grease, oil, or dirt.
Check lubrication levels.
During Operation
Do not allow personnel in the cab or on the load.
Watch the load constantly.
When dumping into trucks, spot the trucks, so the swing will bring the load over the tail gate of the truck. Never
swing over the truck cab.
Keep loaded bucket or crane loads within safe working range, and keep sufficient clearance from high tension
wires.
When load is extremely heavy, lift slightly and test brakes.
Do not smoke or use open flame in vicinity of flammable materials or when servicing the batteries.
Disengage master clutch before oiling, greasing, or making any adjustments.
After Operation
Disengage master clutch.
Park on firm, level, dry ground.
Do not leave bucket or any crane load in raised position, rest bucket or load on ground.
Do not pull boom tight against boom backstops, leave a few inches clearance in the backstops.
Block crawlers at front and rear.
